Panel upgrades
| Rating | 200 A main, 40 spaces |
|---|---|
| Includes | Whole-home surge protection, printed directory |
| Permit | Pulled and inspected by the city |
| From | $2,900 |
Power,
done to code.
Overland Park electricians for panel upgrades, EV chargers, lighting, generators and rewiring. Every job permitted, inspected, and quoted as a fixed number before a truck rolls.
Main 200 A
Switch a breaker to read its spec
Panel upgrades
A 100 amp panel from the eighties was never sized for two EVs, a heat pump and an induction range. We replace it with a 200 amp service, labeled breaker by breaker, with room to grow.
| Rating | 200 A main, 40 spaces |
|---|---|
| Includes | Whole-home surge protection, printed directory |
| Permit | Pulled and inspected by the city |
| Time on site | One day, power off about six hours |
| Warranty | Five years workmanship, manufacturer on the panel |
| From | $2,900 |
EV charger installation
A Level 2 charger on a dedicated 60 amp circuit adds about thirty miles of range an hour while you sleep. We size the run, mount the unit, and register the permit.
| Circuit | 240 V, 60 A dedicated, 48 A continuous |
|---|---|
| Charge rate | About 11.5 kW, roughly 30 miles per hour |
| Hardware | Your charger or ours, hardwired or plug |
| Time on site | Half a day for most garages |
| Warranty | Five years workmanship |
| From | $1,150 |
Lighting design and install
Recessed cans, under-cabinet strips, dimmers that do not buzz. We lay out the lighting to the room, not the joists, and every switch ends up where your hand expects it.
| Fixtures | Recessed, pendant, under-cabinet, exterior |
|---|---|
| Controls | Dimmers, smart switches, three-way runs |
| Color | 2700 K to 3000 K, matched across the room |
| Time on site | One to two days |
| Warranty | Five years workmanship |
| From | $650 |
Standby generators
When an ice storm takes the grid down in January, a standby generator brings the furnace back in ten seconds. We handle the pad, the transfer switch, and the gas coordination.
| Sizing | 14 kW to 26 kW, load calculated |
|---|---|
| Transfer | Automatic transfer switch, whole home or managed |
| Fuel | Natural gas or propane |
| Time on site | Two days plus inspection |
| Warranty | Five years workmanship, manufacturer on the unit |
| From | $8,400 |
Rewiring and remodel wiring
Aluminum branch circuits, cloth-covered cable, ungrounded outlets. Older Johnson County homes carry all three. We rewire room by room with minimal drywall work and a plan you approve first.
| Scope | Whole home or per room, kitchens and baths first |
|---|---|
| Method | Fish and patch, drywall openings mapped in advance |
| Outlets | Grounded, tamper resistant, GFCI and AFCI where required |
| Time on site | Three to ten days by scope |
| Warranty | Five years workmanship |
| From | $1,800 |
Safety inspections
A thermal scan of the panel, a torque check on every lug, a GFCI trip test at every wet location. You get a written report with photos, the same one we would want before buying a house.
| Covers | Panel, grounding, outlets, smoke and CO, exterior |
|---|---|
| Tools | Thermal camera, torque wrench, circuit analyzer |
| Report | Written, with photos, within one business day |
| Time on site | About ninety minutes |
| Fee | Credited toward any repair we do |
| From | $189 |
Spec sheets
What each job includes, what it is rated for, and what it starts at. No tiers, no bundles.
EV charger installation
| Circuit | 240 V, 60 A dedicated, 48 A continuous |
|---|---|
| Charge rate | About 11.5 kW, roughly 30 miles per hour |
| Hardware | Your charger or ours, hardwired or plug |
| From | $1,150 |
Lighting design and install
| Fixtures | Recessed, pendant, under-cabinet, exterior |
|---|---|
| Controls | Dimmers, smart switches, three-way runs |
| Color | 2700 K to 3000 K, matched across the room |
| From | $650 |
Standby generators
| Sizing | 14 kW to 26 kW, load calculated |
|---|---|
| Transfer | Automatic transfer switch, whole home or managed |
| Fuel | Natural gas or propane |
| From | $8,400 |
Rewiring and remodel wiring
| Scope | Whole home or per room, kitchens and baths first |
|---|---|
| Method | Fish and patch, drywall openings mapped in advance |
| Outlets | Grounded, tamper resistant, GFCI and AFCI where required |
| From | $1,800 |
Safety inspections
| Covers | Panel, grounding, outlets, smoke and CO, exterior |
|---|---|
| Tools | Thermal camera, torque wrench, circuit analyzer |
| Report | Written, with photos, within one business day |
| From | $189 |
How long will it charge?
Pick your battery and the circuit we would install. The estimate uses plain physics: volts times amps, with a ten percent loss for the onboard charger.
Estimate only. Real charging tapers above 80 percent and your car's onboard charger sets the ceiling.
5.6 hours to full
- Charger output
- 10.4 kW
- Range per hour
- 32 mi
- Overnight
- Full by morning
Two installs, annotated
A Level 2 charger on its own 60 amp circuit, mounted at cable height for the parking spot, not the wall stud.
B Conduit run kept off the drywall so the garage can still be finished later.
C Permit sticker inside the door. The city inspected it the next morning.
A Recessed cans laid out to the island and the walkway, spaced for even light, not to the joist bays.
B Under-cabinet strip on its own dimmer so prep light and dinner light are different scenes.
C Every lamp at 2700 K so nothing reads blue next to the pendant.
The safety inspection
Ninety minutes, six checks, a written report with photos the next business day. The fee is credited to any repair.
Book an inspection- Panel thermal scan
Every breaker and lug under load, hot spots flagged above 15 degrees over ambient.
- Grounding and bonding
Rod, water bond, gas bond, and the neutral to ground separation at sub panels.
- GFCI and AFCI trip test
Kitchen, baths, garage, exterior, laundry, and bedrooms where required.
- Outlet polarity and ground
Every accessible receptacle tested, reversed and open grounds listed by room.
- Aluminum and cloth wiring
Identified, photographed, and rated for repair or replacement.
- Smoke and CO detectors
Placement, age, and interconnect checked against current guidance.
Test results
Three recent jobs, in the customers' words. Every one of these is a fictional customer of a fictional company.
Panel upgrade, 200 APass
Two EVs and a new heat pump, and the old panel was maxed. They did the whole swap in a day, labeled everything, and the inspector signed off on the first visit.
Priya S., Overland Park, KS
EV charger, 48 APass
The quote listed the wire gauge and the breaker before anyone came out. Charger was mounted and charging by lunch, and the permit showed up in my email that night.
Marcus L., Leawood, KS
Rewire, 1962 ranchPass
Aluminum wiring in every bedroom. They mapped the drywall cuts on a floor plan first, so no surprises. The patches were small and the outlets finally have grounds.
Dana R., Olathe, KS
Request a quote
Tell us what you need and where. You get a fixed number, the wire gauge, and the breaker size in writing before we schedule.
Same-week appointments, same-day for outages. Kansas master electrician license on every job.
Questions
Do you pull permits?
Every panel, circuit, and generator job is permitted and inspected. The permit number is on your invoice and the inspection date is on your calendar before we start.
How fast can you get to an outage?
Same day for a home without power, most days inside four hours. Scheduled work books within the week.
What does a panel upgrade cost?
Most 200 amp upgrades in Johnson County land between $2,900 and $4,200 depending on the meter base and the utility coordination. You get a fixed number before we start.
Can you install the charger I already bought?
Yes. We install customer supplied chargers as long as the unit is listed for hardwired or the outlet type it needs. Bring the model number to the quote call.